top of page

MEDICAL ELECTRONICS

portable nebulizer.png

PORTABLE NEBULIZER

1. Pocket size nebulizer, compact and lightweight, easy to carry, easy to operate.
2. Efficient nebulization, drug atomization and normal saline atomization particles are less <5 μm. 
3. Silent quiet treatment, noise level as low as 25 dB.
4. Simple one button operation and easy to use.
5. Low power consumption. Work either by 2 AA batteries, or with supplied USB cord.
6. Can be used with mouthpiece or mask.
7. Suitable for all ages.
Specification
Type: Nebulizer
Size: 4.5 x 4.5 x 10cm
Power: 2.0W
Atomization Rate: ≥0.2ml/min
Particle Size: 1-5um
Sound Level: <25dB
Operating Frequency: 120KHz±10%
Medication Cup Capacity: 8ml Max, 0.5ml Min
Power Supply: 2 x AA Batteries (Not included), or USB Cable (Included)

coronary analysis system.png

CORONARY  ANALYSIS SYSTEM

Coronary Analysis Systems and Sterile Disposable Blood Pressure Transducers
Non-invasive FFR equipment, which brings great benefit to patients and physicians for coronary artery physiology assessment in a route practice. The non-invasive FFR could significantly improve the PCI decision and provide long-term benefit and cost-effective interest to the hospital.
1) Free from Adenosine and guide wire
2) 3 mins whole process to get FFR 
3) Non-invasive  
4) High diagnostic accuracy (96%)
5) The worldwide only non-invasive FFR device that use CFD algorithm (computational fluid dynamic) for high accuracy performance
Components
1) Console 
2) Disposable kit to connect the manifold of the guiding catheter and the console.

patient monitor.png

PATIENT MONITOR

24h-monitoring robot for isolation ward and ICU
Vital Sign Monitoring Project
Can monitor electrocardiogram, heart rate, blood pressure, blood oxygen saturation, respiration rate, pulse rate, body temperature, carbon dioxide at the end of respiration, bispectral index of electroencephalogram.
Environmental Data Monitoring
Can measure PM2.5, CO2, CH2O, temperature, humidity, PM10, TVOC of the ward.

glucometer.png

OXIMETER

finger pulse oximeter
Major Features
1)SpO2 value display
2)Pulse rate value display, bar graph display
3)Pulse waveform display
4)The display mode can be changed
5)Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage,Automatically power off function: when the device is under the state of measuring interface . it will automatically power off within 5 seconds if the finger falls out of probe
6)Display format can be saved after power off
7) Optional enclosure color

CPAP 2.png

CPAP MACHINE

The essential function of Auto CPAP machine is to ensure the smooth flow of the airway. For OSA (Obstructive Sleep Apnea) patients, the main problem of OSA is upper airway collapse, and the degree of collapse is not same,  common reactions: mouth breathing, snoring,  and apnea. The Auto CPAP is able to provide Continuous Positive Airway Pressure through mask to patient, which can reach the ideal treatment.
Screen: 2.8 inch TFT, 320*240
Pressure Range: 4-20 cmH2O
Screen Auto Sleep: Auto sleep in 15 minutes, press any button to highlight screen.
Data Storage: SD Card
Power Supply; Input 100-240V, 50-60Hz, 2-1A; Output +24V, 2.5A
DC Voltage: 24VDC
Sound: <28db
Water Capacity: 220ml max
Humidifier Level: 0-5 level
Humidifier: Integrated Heated Humidifier
Machine Dimensions(cm): 28L*14W*9.5H
Carton Dimensions(cm): 38L*36W*16H
Gross Weight: 3.9kg; Net weight: 1.6kg

bottom of page